Sale!

Fluke 772 Milliamp Process Clamp Meter, 100mA dc

$ 98.03

DescriptionFluke 772 Milliamp Process Clamp MeterIf your job involves maintenance on the PLC and analog I/O control systems used in modern instrumentation or automation, chances are you’re wasting time during test procedures. The blocks in your workflow aren’t your fault — they’re built-in. A process clamp meter like the Fluke 772 can save time and money.The Fluke 772 Milliamp Process Clamp Meter has a very simple selling point — you don’t need to break the loop! Just clamp on the meter and you can verify a loop current in the standard 4–20mA ranges to 0.2% accuracy. The unit automatically calibrates to the current range, and shows values for both the measured current and the corresponding percentage range value on its built-in dual displays.Older equipment? No problem. The unit has an additional 99.9mA range for measurements 10–50mA. Need to test control system I/O or I/Ps? That’s not a problem, either. The Fluke 772 can deliver loop power at 4–20mA at 24V, or supply a test current either in a linear ramp or in 25% steps.The 772 builds on Fluke’s long experience in building robust, practical field test equipment. The clamp is detachable, with an integrated cable that makes it easy to take measurements in restricted spaces. There’s also an inbuilt spotlight to illuminate awkward test areas, and automatic power off for times when you don’t have a spare hand.Fluke 772 Milliamp Process Clamp Meter Key FeaturesHigh accuracy (0.02%)0.01mA resolutuon and sensitivityMeasure 4 to 20mA signals without breaking the loopMeausre mA signals for PLC and control system analogue I/ODual backlit display shows mA measurement and percent of 4 to 20mA spanMeasurement spotlight for illuminating darkened environmentsDetachable clamp with extension cable for measurements in tight locationsMeasure 10 to 50mA signals in older control systems using the 99.99mA rangeAutomatically change the 4 to 20mA output for remote testingAuto off and backlit timeout conserve battery lifeHold function captures last displayed readingsIn-circuit measurements of 4 to 20mA signalsSimultaneous mA in-circuit measurement with 24V loop power for powering and testing transmittersSource 4 to 20ma signals for testing I/O or I/PsmA output linear ramp or 25% step outputAutomatically change the 4 to 20mA output for remote testingFull List of Products IncludedFluke 772 Milliamp Process Clamp Meter4 x Installed AA Alkaline BatteriesSoft Carrying CaseTL75 Test LeadsAC72 Detachable ClipTL940 Mini Hook Test LeadsInstruction SheetHanging Tool with Hook and Loop Strap
Categories: ,

Related products