Sale!

Universal Pole Kit

$ 35.96

Description Our Universal Pole Kit is a perfect and inexpensive 6 ft pole that allows placement of your nesting box and or bird feeder anywhere in your yard. Once you place the bottom section into the ground (about 10-12″), your nesting box or feeder will be easy to reach. The Universal Pole Kit will accommodate most mountable nest boxes as well as wooden hopper feeders and also tube feeders. Includes a flange and screws for flat mounts and a pole adapter for 3/4 inch threaded tube bird feeders. Durable 1″ OD powder coated steel. Simple to install. Grab your hammer and a block of wood. You may also want a level to make sure your pole is straight. *Each section is of pole is identical. One end of each of the 5 sections is narrower than the other. Take one section of the pole and put it on the ground, fatter end first. Place a block of wood on the top of the pole and hammer the block of wood to pound the pole section into the ground. Place extra pole sections one at a time on top of the bottom one. Voilá! If you find that the flange is a bit loose on the top of the pole and your nesting box or feeder turns around too easily, one or two layers of clear packing tape or even a layer of duct tape wound around the top section of pole will easily solve that. Details 1″ powder coated steel. Great for mounting nesting boxes, as well as some bird feeders. Each section is identical. One end of each pole section is narrower than the other end. This narrow end must be facing up (for mounting the flange). Five 16″ length sections, total length of assembled pole is 72″. The bottom section goes into the ground a little less than 1 foot, and places your nesting box or feeder at - 5′ above the ground. Weight 2.7 lbs. Will accommodate some tubular bird feeders that have threaded openings in the base. Will accommodate our pole mounted squirrel baffles and raccoon baffles. Instructions for mounting a Squirrel Baffle or Raccoon Baffle onto this pole: Pound (carefully) four sections into the ground, first. Use a block of wood to hammer the bottom section (so you don’t damage the steel) 10-11″ into the ground. Using a level is usually more accurate than eyeballing (trust us ;-). With a screwdriver, mount the bracket that holds the baffle onto the fifth section of the pole. This bracket can be mounted 6″ below the top of the pole section. Slide the top section onto the bottom sections, then slip the baffle over this top pole section and add your nesting box or feeder. If your nesting box or feeder can easily spin, wind a bit of clear packing tape or even duct tape once or twice around the top section where the flange sits, until it’s secure. Your baffle will then be high enough to deter squirrels.
Categories: ,

Related products